328
Views
3
CrossRef citations to date
0
Altmetric
Original Research

Shape synthesis of an assistive knee exoskeleton device to support knee joint and rehabilitate gait

, &
Pages 462-470 | Received 06 Nov 2017, Accepted 24 Jun 2018, Published online: 25 Jul 2018
 

Abstract

Purpose: The assistive knee exoskeleton device is used for supporting the surrounding ligaments, tendons, and muscles of the injured knee joint. Various knee exoskeletons have been discussed; however, their shape synthesis is not reported. This study aims to present the shape synthesis of the assistive knee device. Moreover, four-bar linkage is used for the knee exoskeleton, in this study.

Methods: Clinical biomechanical data are adapted from gait database for one gait cycle. Using the clinical gait data, position and static force analyses are performed to obtain a set of orientations and unknown forces. Simultaneously, CAD models are prepared, and the obtained forces are applied to the CAD models of the four-bar linkage knee exoskeleton. Consequently, the threshold is obtained for each component of the knee exoskeleton and the unwanted material below the threshold is removed.

Results: A reduction of 45% in the peak actuating force is observed in comparison with the literature. Besides, a total reduction of 21% in the mass of four-bar knee exoskeleton is observed in contrast to the base models when shape synthesis is performed.

Conclusions: An assistive knee exoskeleton is developed using the shape synthesis methodology in which four-bar linkage is used. New shapes of thigh and shank attachments are obtained. The developed knee exoskeleton can be used by persons with the injured knee for supporting the ligaments, tendons, and muscles. Besides, control technology can be implemented to make it useful for persons with monoplegia.

    Implications for rehabilitation

  • Assistive knee exoskeleton devices proved to be an important tool for providing support to injured knee joints.

  • Typically single axis joints are observed in the lower limb exoskeletons which can be replaced with linkage mechanisms to obtain the desired range of motion.

  • In this study, four-bar linkages are used for the knee exoskeleton in which cranks and rockers are connected to the lateral and medial sides of the knee joint, for connecting shank and thigh attachments. Shape synthesis is performed on the components of four-bar exoskeleton through the evaluated reaction forces. The components are assembled to form an assistive knee exoskeleton which can be used by any person with injured knee joint.

Acknowledgements

The Ph. D. Scholarship granted by the Ministry of Human Resource Development, Government of India to the first author is highly acknowledged.

Disclosure statement

No potential conflict of interest was reported by the authors.

Notes

1 Visible in web version of article

Log in via your institution

Log in to Taylor & Francis Online

PDF download + Online access

  • 48 hours access to article PDF & online version
  • Article PDF can be downloaded
  • Article PDF can be printed
USD 65.00 Add to cart

Issue Purchase

  • 30 days online access to complete issue
  • Article PDFs can be downloaded
  • Article PDFs can be printed
USD 340.00 Add to cart

* Local tax will be added as applicable

Related Research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.