![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
This article describes an investigation of flame shapes and flow configurations in a premixed, swirl-stabilized dump combustor. High swirl, annular nozzle flows of this nature enable a variety of different flame configurations and heat release distributions with their associated flow fields. These differences are significant, since each of these configurations, in turn, has different thermoacoustic sensitivities and influences on combustor emissions, nozzle lifetime, and liner heating. These different configurations arise because multiple flame stabilization locations are present, associated with the inner and outer shear layers of the annulus, and the stagnation point of the vortex breakdown region. We present results from high-speed luminosity imaging, particle image velocimetry (PIV), and OH-planar laser induced fluorescence (PLIF) to illustrate time-averaged and instantaneous flame shapes and flow fields associated with the different configuration “families.” Selected cases are compared with large eddy simulations (LES). Particular emphasis is given to the distinctly different flame and flow topologies that exist in these flows, and their sensitivity to geometric (such as centerbody size and shape, combustor diameter, exhaust contraction) and operational (e.g., bulkhead temperature, preheat temperature, fuel/air ratio) parameters. We particularly emphasize the importance of the centerbody shape, and its associated impact on the structure of the central recirculating flow, as differentiating between two different families of flame shapes.
| CB | = | centerbody |
| CIFS | = | combustion induced flow separation |
| DCB | = | centerbody diameter |
| DCOMB | = | combustor diameter |
| fcutoff | = | cutoff frequency for seeding particle dynamics |
| ISL | = | inner shear layer |
| IRZ | = | inner recirculation zone |
| LCOMB | = | combustor length |
| m | = | PIV seed particle mass |
| OSL | = | outer shear layer |
| ORZ | = | outer recirculation zone |
| PVC | = | precessing vortex core |
| R | = | PIV seed particle radius |
| Re | = | Reynolds number |
| Sm | = | momentum base swirl number |
| St | = | Stokes number |
| Stcut-off | = | cut-off Stokes number for seeding particle dynamics |
| Tad | = | adiabatic flame temperature |
| Tbhd | = | bulkhead corner temperature |
| TCB | = | centerbody corner temperature |
| Tph | = | preheat temperature of reactants |
| U | = | flow velocity |
| Ur | = | radial flow velocity component |
| Urms | = | root-mean-square velocity |
| Uz | = | axial flow velocity component |
| Uz,o | = | average axial nozzle exit velocity |
| Uθ | = | azimuthal flow velocity component |
| u | = | seed particle velocity |
| ur | = | seed particle radial velocity component |
| uz | = | seed particle axial velocity component |
| uθ | = | seed particle azimuthal velocity component |
| uterm | = | seed particle terminal velocity (additional subscript refers to velocity component) |
| VBB | = | vortex breakdown bubble |
| ϵannulus | = | post-swirler annulus area contraction ratio |
| ϵexhaust | = | exhaust nozzle area contraction ratio |
| = | dynamic viscosity | |
| = | kinematic viscosity | |
| ρ | = | density |
| φ | = | fuel/air equivalence ratio |