Design and simulation of a tactile display based on a CMUT array

Abstract

In this article, we present the design of a tactile display based on a CMUT-phased array. The array implements a ‘pixel’ of the display and is used to focus airborne ultrasound energy on the skin surface. The pressure field, generated by the focused ultrasound waves, is used to excite the mechanoreceptors under the skin and transmit tactile information. The results of Finite Element Analysis (FEA) of the Capacitive Micromachined Ultrasonic Transducer (CMUT) and the CMUT-phased array for ultrasound emission are presented. The 3D models of the device and the array were developed using a commercial FEA package. Modelling and simulations were performed using the parameters from the POLYMUMPS surface micromachining technology from MEMSCAP. During the analysis of the phased array, several parameters were studied in order to determine their importance in the design of the tactile display. The output of the array is compared with the acoustic intensity thresholds in order to prove the feasibility of the design. Taking into account the density of the mechanoreceptors in the skin, we conclude that there should be at least one receptor under the excitation area formed on the skin.

Keywords:

• tactile displays
• tactile communication
• tactation
• tangible interface
• MEMS
• CMUT
• ultrasonic
• phased array

Notes

Note

1. PolyMUMPS Design Handbook, Revision 11.0, Memscap Inc., Durham NC, USA.