![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
ABSTRACT
Three-phase converters using diode or silicon-controlled rectifier (SCR) are widely employed to convert the commercial AC supply to DC. Such converters inject harmonics into the power supply system and thereby distort supply system voltage waveform. A simple input current wave-shape improvement technique using a shunt-connected harmonic current compensator is presented in this work, intended to reduce the total harmonic distortion (THD) of input current of three-phase diode and SCR phase-controlled rectifiers operating with inductive loads, by matching them to the specific converter as a combined package. The compensator proposed here comprises of a three-limb voltage source converter using insulated-gate bipolar transistor, working on instantaneous current and voltage measurements of the compensator only and not of the load. The technique uses a simple feedforward control for AC source current harmonic compensation of rectifiers without monitoring the AC line currents, i.e. use of online computation. The proposed system is simulated and tested on a laboratory prototype. The measured input current THD values without additional line filters are found to be below 8.3%, which is within acceptable limits, proving that the new technique is capable of compensating predetermined current harmonics of diode or SCRs.
Disclosure statement
No potential conflict of interest was reported by the authors.