673
Views
25
CrossRef citations to date
0
Altmetric
feature articles

Flow and Heat Transfer of Single-and Two-Phase Boiling of Nanofluids in Microchannels

, , , &
Pages 1252-1265 | Published online: 06 Apr 2015
 

Abstract

Experiments using nanofluids in horizontal, rectangular, high-aspect-ratio microchannels were performed where heat was provided electrically to the microchannel wall to bring about heating and phase change while recording temperature (via infrared camera) and channel pressure drop. High-speed video captured images of boiling two-phase flow through the transparent microchannel wall. Nanofluids used were solutions of aluminium oxide in ethanol with particle concentrations from 0.01% to 0.1%, with pure ethanol as reference. Fluid mass flux ranged from Reynolds numbers of 2.3 to 18.1 and heat fluxes from 1.5 to 9 kW m−2. Friction factors for the nanofluids were evaluated. Single-phase fluid pressure drop did not vary significantly with nanoparticle concentration. When flow boiling occurred, the two-phase flow pressure drop was unstable and fluctuating. Inlet pressures had greater amplitude of oscillation but similar frequency to outlet pressures. Heat transfer increased with the presence of nanoparticles compared with pure ethanol. Moreover, evaporation from the meniscus was studied. There is a sudden evaporation phenomenon where the meniscus rapidly forms. Infrared data demonstrate the effect of heat flux on temperature distribution near the three-phase contact line. Nanoparticles enhance boiling heat transfer coefficients, peaking at a concentration of 0.05% with significant enhancement over pure ethanol.

NOMENCLATURE

A=

area

cp=

specific heat capacity

d=

diameter

f=

friction factor

G=

mass flux

h=

convective heat transfer coefficient

K=

loss coefficient

l=

length

=

mass flow rate

P=

pressure

q=

heat flux

Re=

Reynolds number

T=

temperature

u=

velocity

W=

width

z=

distance along channel

Greek Symbols

θ=

angle

μ=

viscosity

ρ=

density

σ=

aspect ratio

φ=

volume fraction

Additional information

Notes on contributors

Gail Duursma

Gail Duursma obtained her first degree in chemical engineering from the University of Cape Town and her D.Phil. from the University of Oxford, and is currently a lecturer in chemical engineering at the University of Edinburgh.

Khellil Sefiane

Khellil Sefiane has M.Sc. and Ph.D. degrees in chemical engineering. He is presently a professor and ExxonMobil Fellow at the University of Edinburgh and is head of the Institute of Materials and Processes.

Alexandre Dehaene

Alexandre Dehaene was a student at ENSIAME, Université de Valenciennes, who did a placement at the University of Edinburgh.

Souad Harmand

Souad Harmand is a professor of engineering at ENSIAME, Université de Valenciennes, France. She is vice-president of the Université de Valenciennes and leader of the research team TEMPO.

Yuan Wang

Yuan Wang obtained her Ph.D. from the University of Edinburgh and now works at the Science and Technology on Scramjet Laboratory of the National University of Defense Technology, in Hunan, China.

Log in via your institution

Log in to Taylor & Francis Online

PDF download + Online access

  • 48 hours access to article PDF & online version
  • Article PDF can be downloaded
  • Article PDF can be printed
USD 61.00 Add to cart

Issue Purchase

  • 30 days online access to complete issue
  • Article PDFs can be downloaded
  • Article PDFs can be printed
USD 323.00 Add to cart

* Local tax will be added as applicable

Related Research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.