Stability and corrosion property of oil-infused hydrophobic silica nanoparticle coating

ABSTRACT

Hydrophobic SiO₂ nanoparticles were sprayed onto the aluminium alloy substrate followed by the infusion of PFPE oil. Surface morphologies were observed by scanning electron microscopy and 3D laser confocal microscopy. The water contact angle and the polarization curve were measured before and after long-term immersion tests. The results showed that higher SiO₂/PS proportion with lower content of polystyrene can enhance the water contact angle of the SiO₂ nanoparticle coating. The water contact angle of the oil-infused surface is barely affected by corrosive immersion periods and the value keeps at a level of 110°∼120°. The oil-infused surface exhibits stable and superior corrosion resistance with the absence of obvious cathode and anode currents on polarization curves after corrosive immersion for 30d. In contrast, the negative shift of E_corr by about 300 mV and the increase of i_corr by 3 orders of magnitude occur for the superhydrophobic coating.

KEYWORDS:

• Superhydrophobic coating
• SiO₂ nanoparticle
• oil-infused surface
• corrosion resistance
• aluminium alloy

Disclosure statement

No potential conflict of interest was reported by the authors.

Additional information

Funding

This work was supported by National Key R&D Program of China [grant number 2018YFC0406702] and National Natural Science Foundation of China [grant number 51809183].