Abstract
The ability of pine bark and almond shells to remove bisphenol A (BPA) from aqueous solutions was evaluated. Samples of these traditional agro-forestry by-products were milled, sieved into different particle size fractions (0.10–0.15 and 1.5–2.0 mm) and submitted to two different types of treatment. Sorption experiments were conducted in a batch system at room temperature and natural pH. Sorption equilibrium was attained after 48 h for all systems under study. Bisphenol A was adsorbed more effectively on the smaller particles of the sorbents. Pine bark and almond shell pretreated with formaldehyde presented higher sorption efficiency (95%), followed by almond shell (87%) and pine bark (82%) washed with hot water. All the sorption isotherms were found to fit a Freundlich equation, with correlation coefficients (R 2) between 0.823 and 0.989. The sorption coefficient (K F) ranged from 0.06 to 0.74 (mg1−1/n ·L 1/n ·g −1). These results indicate that utilisation of both materials as an alternative sorbent for the removal of bisphenol A from contaminated waters is promising because they are available in large amounts and have an acceptable cost–efficiency ratio when compared with traditional adsorbents.
Keywords:
Acknowledgements
The authors gratefully acknowledge the financial support of FCT (Fundação da Ciência e Tecnologia).