Abstract
A series of crysnanoclay-loaded thermoplastic polyurethane (TPU) elastomer/polycarbonate (PC) nanocomposites have been prepared using twin screw extruders. The physicomechanical properties such as tensile behaviors, flexural properties and impact strength of the composites have been reported. Significant improvement in tensile modulus and flexural modulus were noticed for nanocomposites. The thermal characteristics of nanocomposites have been determined by thermogravimetric analysis (TGA) techniques. Thermal degradation kinetic parameters such as energy of activation (Ea) have been calculated from TGA thermograms for the nanocomposites using three mathematical models namely; Coats–Redfern, Horowitz – Metzger and Broido's methods and the results are compared. The effect of crysnanoclay on the storage modulus (E′), loss modulus (E″), and damping factor (tan δ) as a function of temperature have been measured by dynamic mechanical analysis (DMA). The storage moduli of nanocomposites have been increased after incorporating crysnanoclay in polymer matrix.