Sorption and Drying Characteristics of Xylite

Abstract

The wood from which xylite is formed in a long-term process undergoes numous changes while still retaining the character of a hygroscopic porous material. To plan the optimal drying schedule of xylite, the permeability coefficient, diffusion coefficient, and surface emission coefficient were determined. The porosity of xylite is low due to the demolished capillary structure; concurrently with the blocked pits, the permeability of xylite is very low, with a permeability coefficient not higher than 2.12 × 10⁻¹⁰ m²/Pa s. The capillary flow of free water is insignificant, allowing the diffusion transport of water to prevail. The diffusion coefficient is considerably influenced by the xylite's density. We confirm a significant increase in the bound water diffusion coefficient as the temperature increased (from 5.5 × 10⁻¹² m²/s at 20°C to 46.3 × 10⁻¹² m²/s at 40°C), and we predict that the activation energy will increase as the moisture content of xylite decreases (approx. 0.63 to 1.05%/% MC changes). As a consequence of the low surface resistance, the surface emission coefficient barely influences the moisture transport below the fiber saturation point.With an appropriate drying schedule, quality dried xylite can be used for various products as an equivalent substitute for dark-colored, high-density woods like ebony.

Keywords:

• Isotherms
• Pore structure
• Wood drying

Notes

Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/ldrt.