Numerical Simulation of a Solar Kiln Design for Drying Timber with Different Geographical and Climatic Conditions in Australia

Abstract

A numerical simulation for the modeling of solar kilns for hardwood timber drying with different boundary conditions has been developed in this work. This simulation has been used to predict the key behavior of the wood and the kiln itself under different geographical and weather conditions in Australia. This work, therefore, enables a site to be suggested that is likely to give the best kiln performance both in terms of the productivity and the quality of the end-use product. As test cases, realistic climatic conditions for three representative geographical locations in Australia, including Sydney (latitude 33.86°S), Melbourne (37.81°S), and Brisbane (27.46°S), have been considered in this simulation. Out of the three sites considered in this work, the fastest drying rates (and highest diffusion coefficients) were predicted in Brisbane. The highest level of instantaneous strain in the timber for this location was also predicted to be 0.0075 m/m, which is much less than the failure value (0.02 m/m). The moisture content distribution profile within the boards toward the end of the drying period was found to be almost uniform, which is likely to cause low degrade in the dried timber.

Keywords:

• Numerical simulation
• Solar kiln
• Timber drying

Notes

Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/ldrt.