ABSTRACT
The pores in shales are mainly on a nanometer scale, and the pore-size distribution is vital with regard to the preservation and exploitation of shale gas. This study focuses on the organic-rich lower Cambrian black shale in the Upper Yangtze Platform, South China and investigates their TOC, mineralogical composition and nanopore structure. Low-pressure N2 and CO2 adsorption experiments were conducted at 77.35 K and 273.15 K, respectively, and the nanopore structures were characterised by the modified Brunauer–Emmett–Teller, Dubinin–Radushkevich, t-plot, Barrett–Joyner–Halenda and density functional theory (DFT) methods. The results indicate the following. (1) The lower Cambrian shale has a high TOC content (1.77–7.23 wt%) and a high quartz content (27.7–51.6 vol%). The total specific surface area varies from 12.02 to 28.87 m2/g. Both the total specific surface area and quartz content are positively associated with the TOC content. (2) Shale samples with a higher TOC content have a greater number of micropores, resulting in more complicated nanopore structures. Micropore volumes/surface areas and non-micropore surface areas all increase with increasing TOC content, indicating that TOC is the key factor determining the nanopore structure of the lower Cambrian shale. (3) A combination of N2 and CO2 adsorption provides the most suitable detection range (∼0.3–60 nm) and is both highly reliable and accurate with regard to nanopore structure characterisation.
Acknowledgements
The authors would like to acknowledge the financial support of the National Science and Technology Major Project (No. 2016ZX05034-001) and National Natural Science Foundation of China (No. 41472112).
Disclosure statement
No potential conflict of interest was reported by the authors.