Experimental Investigation of Mixed Convection in a Channel With an Open Cavity

Mixed convection in an open cavity with a heated wall bounded by a horizontally unheated plate is investigated experimentally. The cavity has the heated wall on the inflow side. Mixed convection fluid flow and heat transfer within the cavity is governed by the buoyancy parameter, Richardson number (Ri), and Reynolds number (Re). The results are reported in terms of wall temperature profiles of the heated wall and flow visualization for Re = 100 and 1000, Ri in the range 30–110 (for Re = 1000) and 2800–8700 (for Re = 100), the ratio of the length to the height of cavity (L/D) is in the range 0.5–1.5, and the ratio of the channel height to cavity height (H/D) is in the range of 0.5 and 1.0. The present results show that the maximum dimensional temperature rise values decrease as the Reynolds and the Richardson numbers decrease. The flow visualization points out that for Re = 1000 there are two nearly distinct fluid motions: a parallel forced flow in the channel and a recirculation flow inside the cavity. For Re = 100 the effect of a stronger buoyancy determines a penetration of thermal plume from the heated plate wall into the upper channel. Nusselt numbers increase when L/D increase in the considered range of Richardson numbers.

Keywords:

• mixed convection
• open cavity
• channel flow
• experimental visualization

This work was supported by MIUR with a 2003 PRIN grant.