![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
ABSTRACT
White etching cracks (WEC) can lead to premature rolling contact fatigue. Possible drivers of WEC can be mixed friction, sliding between rolling elements and raceways, electrical current, critical additives, and water-contaminated lubricant. With respect to WEC failures induced by sliding between rolling elements and raceways under mixed friction, an approach is presented that can explain the experimentally observed failure characteristics of cylindrical roller thrust bearings. Variants of the bearing were tested using a WEC-critical lubricant. The tests showed that not only the contact pressure and sliding between rolling elements and raceways but also the lubrication conditions (specific film thickness) and the frequency of the contact load cycles have an influence on WEC life. These influences are reflected best by a newly introduced characteristic parameter termed friction energy accumulation. As far as WEC failures induced by sliding under mixed friction are concerned the friction energy accumulation could be used for a comparative assessment of the WEC risk of arbitrary rolling bearing applications. A link between the friction energy accumulation and the absorption of hydrogen is discussed and can provide further explanations for the susceptibility of bearing components to WEC formation.