Machining Characteristics of Inconel 718 by Sinking-EDM and Wire-EDM

Abstract

Inconel 718 superalloy has wide applications in several industries due to its excellent mechanical properties. However, it is very difficult to machine using conventional cutting and grinding because of its high strength at elevated temperatures. Electrical discharge machining (EDM) is an alternative competitive process to machine Inconel alloys by electrical erosion. However, machinability and surface characteristics of EDMed Inconel surfaces are poorly understood. This study focuses on the machining characteristics of Inconel 718 by Wire-EDM and Sinking-EDM with a new Cu-SiC electrode, respectively. Material removal efficiency, surface roughness, surface topography, surface alloying, and electrode wear have been characterized. It is found that the high toughness of Inconel 718 would be the major contributing factor to the absence of microcracks on the EDMed surface. The new fabricated Cu-SiC electrode for Sinking-EDM has better performance in terms of material removal rate (MRR), surface roughness, and electrode wear. The higher melting temperature and fine microstructure of SiC contribute to the lower electrode wear of the new Cu-SiC electrode than the traditional Cu electrode.

Keywords:

• Cu-SiC electrode
• EDM
• Inconel 718
• Surface