The comparison between two methods of membrane cleaning to control membrane fouling in a hybrid membrane photobioreactor (HMPBR)

Abstract

In this study, the effect of two membrane cleaning methods, such as aeration and addition of granular particles in a hybrid membrane photobioreactor (HMPBR) including Spirulina sp. with the concentration of 1.5 g·L⁻¹ was investigated. Three different spargers [i.e., different diameters of orifice (d_o): 0.5, 1, and 1.5 mm] and granular particles (i.e., three packing ratios of 0.5, 1, and 1.5%) were used. The results showed that with the increase in granular packing ratio, R_c/R_t decreased significantly. The best result was achieved by combining aeration with an orifice diameter of 1.5 mm and a granular packing ratio of 1.5%, which led to the lowest R_c/R_t value (0.38), while R_c/R_t value with a d_o of 1.5 mm was 0.68 without particles. In contrast, the ratio of pore blocking resistance to total resistance (R_p/R_t) increased by 4.2% under the combined application of 1.5 mm of orifice diameter and 1.5% of granular packing ratio. The results from protein concentrations in the cake layer showed that as the d_o became larger, cake protein concentration decreased by 40%, whereas increasing the granular packing ratio from 0.5 to 1.5% increased protein concentration by 60% in the cake layer.

Keywords:

• Aeration
• fouling
• hybrid membrane photobioreactor
• mechanical cleaning

Acknowledgments

The authors would like to thank Esmaeil Ranjbari for his kind help throughout the experiments.

Additional information

Funding

This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.