CHANNEL-TO-CHANNEL PRESSURE DIFFERENCES IN SERPENTINE MINICHANNEL FLOW SYSTEMS

One of the interconnected factors that can lead to failures in the flow plates of PEM fuel cells is the pressure differences that exist between adjacent flow channels. These pressure differences lead to stresses in the channel supports—i.e., the ribs—which can be important in the presence of stresses arising due to other factors such as temperature gradients in the flow plates. In order to investigate the magnitudes of the pressure differences across the supports and the places where the maximum pressure differences occur, the flow and pressure variations in various forms of serpentine channels, these channels having a rectangular cross-sectional shape, have been numerically calculated. The presence of the diffusion layer has been ignored and the flow has been calculated using a commercial finite-element software package using the governing equations written in dimensionless form. Solutions have been obtained for various values of the Reynolds number for each of the flow geometries considered for two channel height-to-width ratios (one and three). Except for the flow in the vicinity of the bends in channels, the pressure has been found, as is to be expected, not to vary significantly across the channel cross section. The difference between the center point dimensionless pressure in a given channel with those at the same longitudinal position in the adjacent channels has been determined. The dependence of the highest dimensionless pressure difference between channels on the input parameters has been examined. 273pt

Acknowledgments

This work was supported by the Centre for Automotive Materials and Manufacturing (CAMM).