Evaluation of a permanent deformation model for asphalt concrete mixtures using extra-large wheel-tracking and heavy vehicle simulator tests

Abstract

This paper evaluates a mechanistic–empirical permanent strain model for asphalt concrete mixtures. The evaluation was carried out based on two different types of tests: an extra-large wheel-tracking (ELWT) test and a full-scale accelerated pavement test using a heavy vehicle simulator (HVS). Asphalt slabs from three different types of asphalt mixtures were prepared for the ELWT test and tested at several pavement temperatures and tyre inflation pressures. Lateral wandering was also incorporated. The measured permanent deformations in the asphalt slabs were thereafter modelled using the permanent strain model from the US Mechanistic-Empirical Pavement Design Guide and model parameters were estimated for the three types of mixes. For validation, data from an HVS tested pavement structure consisting of the same asphalt mixtures as those tested using the ELWT were used. A set of calibration factors for the three mixtures were therefore obtained between the two tests. In all cases, the calibration factors were within ±20% from unity. Differences in geometry, scale, wheel loading configuration as well as the speed of loading between the two test devices could be the possible reasons for the differences in observed calibration factors.

Keywords:

• permanent deformation
• asphalt concrete
• traffic wandering
• heavy vehicle simulator
• wheel-tracking test

Disclosure statement

No potential conflict of interest was reported by the author(s).