Remediation of Metal-Contaminated Soil by an Integrated Soil Washing-Electrolysis Process

Chelating agents such as EDTA and DTPA are often used to remove metals from soil. However, their toxicity, bio-recalcitrance, and problems with recovery of heavy metal and chelating agents severely limit their applications. A biodegradable chelating agent, LED3A, and two surfactants, SDS and Triton X 100, were evaluated as potential alternatives for remediation of metal-contaminated soil.

LED3A alone only removed 40% of cadmium the addition of surfactant significantly enhanced its cadmium removal capacity up to 80% for a wide range of pH (5 to 11). The enhancement increased with both surfactant concentrations and LED3A concentrations. Because LED3A had a much higher removal capacity for copper, the synergistic effect of surfactant-LED3A mixture was less obvious. Sequential extraction analysis indicated that the LED3A not only removed copper from carbonate and Fe-Mn oxide fraction, but also from organic fractions. A three-dimension electrolysis reactor could effectively recover both metals and LED3A-SDS within thirty minutes. The combined soil washing by LED3A-surfactants and electrolysis provides a potential approach for remediation of copper- and cadmium-contaminated soils.

Keywords:

• Soil washing
• sequential extraction
• LED3A
• electrolysis.

This study was supported by the National Science Council of Taiwan under contract NSC91-2211-E-040-001.

Notes

¹ Edwards et al., 1994.

² Deshpande et al., 1999.

³Chelating agent, NA = not applicable.

⁴ Crudden et al., 1994.