Assessment of Some Heavy Metals in the Dead Sea Mud and Treatment Optimization

ABSTRACT

This paper describes the experimental remediation of the Dead Sea mud and the quantitative determination of some heavy metals. Herein, two chelating agents were employed as extracting aqueous solution: ethylenediaminetetraacetic acid (EDTA) and citric acid. The study focused on the main known heavy metals that were reported previously to be in the Dead Sea mud, which are Co, Ni, Pb, Zn, and Cr. Findings had indicated that citric acid was efficient in the removal of the aforementioned heavy metals. Physicochemical parameters that were expected to affect the removal of metals in the Dead Sea mud were optimized. Those parameters were the chelating agent concentration, mixing time and speed, type of washing water, temperature, and pH. The results showed that the best removal of heavy metals from Dead Sea mud can be achieved under optimum citric acid concentration, 1.5 g/50 mL for treatment of 10 g mud. Optimum mixing speed and time were found to be 800 rpm and 1 hr, respectively. Regarding washing water, it was found that the use of the same water for repeated washing provided better removal percentages. pH values and temperature had effect on removal percentages of the heavy metals from mud. However, working at pH 7 and room temperature would provide convenient results for heavy metal removal.

KEYWORDS:

• Heavy metals
• ICP
• EDTA
• citric acid
• Dead Sea mud

Acknowledgment

The authors would like to extend their gratitude to HMSCR (Hamdi Mango Center for Scientific Research) at the University of Jordan for providing a suitable well-equipped working environment.

Funding

The authors acknowledge the Arab Potash Company for funding this research.