1,156
Views
26
CrossRef citations to date
0
Altmetric
Original Articles

Crystalline Silica Dust and Respirable Particulate Matter During Indoor Concrete Grinding—Wet Grinding and Ventilated Grinding Compared with Uncontrolled Conventional Grinding

, , , , , & show all
Pages 770-779 | Published online: 07 Nov 2007
 

Abstract

The effectiveness of wet grinding (wet dust reduction method) and ventilated grinding (local exhaust ventilation method, LEV) in reducing the levels of respirable crystalline silica dust (quartz) and respirable suspended particulate matter (RSP) were compared with that of uncontrolled (no dust reduction method) conventional grinding. A field laboratory was set up to simulate concrete surface grinding using hand-held angle grinders in an enclosed workplace. A total of 34 personal samples (16 pairs side-by-side and 2 singles) and 5 background air samples were collected during 18 concrete grinding sessions ranging from 15–93 min. General ventilation had no statistically significant effect on operator's exposure to dust. Overall, the arithmetic mean concentrations of respirable crystalline silica dust and RSP in personal air samples during: (i) five sessions of uncontrolled conventional grinding were respectively 61.7 and 611 mg/m 3 (ii) seven sessions of wet grinding were 0.896 and 11.9 mg/m3 and (iii) six sessions of LEV grinding were 0.155 and 1.99 mg/m3. Uncontrolled conventional grinding generated relatively high levels of respirable silica dust and proportionally high levels of RSP. Wet grinding was effective in reducing the geometric mean concentrations of respirable silica dust 98.2% and RSP 97.6%. LEV grinding was even more effective and reduced the geometric mean concentrations of respirable silica dust 99.7% and RSP 99.6%. Nevertheless, the average level of respirable silica dust (i) during wet grinding was 0.959 mg/m3 (38 times the American Conference of Governmental Industrial Hygienists [ACGIH] threshold limit value [TLV] of 0.025 mg/m 3 ) and (ii) during LEV grinding was 0.155 mg/m 3 (6 times the ACGIH TLV). Further studies are needed to examine the effectiveness of a greater variety of models, types, and sizes of grinders on different types of cement in different positions and also to test the simulated field lab experimentation in the field.

Acknowledgment

This research project was funded by the National Institute for Safety and Health through the Center to Protect Workers' Rights.

Although the data in this report are adapted from a research project funded by the National Institute for Safety and Health through the Center to Protect Workers' Rights, it does not necessarily reflect the views of these Agencies, and no official endorsement should be inferred.

Notes

A Based on arithmetic means.

A Based on arithmetic means.

Log in via your institution

Log in to Taylor & Francis Online

PDF download + Online access

  • 48 hours access to article PDF & online version
  • Article PDF can be downloaded
  • Article PDF can be printed
USD 61.00 Add to cart

Issue Purchase

  • 30 days online access to complete issue
  • Article PDFs can be downloaded
  • Article PDFs can be printed
USD 148.00 Add to cart

* Local tax will be added as applicable

Related Research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.