FELA evaluated bearing capacity factors for circular, planar, and interfering cutting edges of open caisson

ABSTRACT

In the study, a thorough analysis of the drained bearing capacity factors of cutting edges of open caissons with and without interference has been carried out which helps in planning the controlled sinking of caissons. Five different conditions are analysed in this study: single circular, single planar, V-shape planar, interfering planar, and interfering V-shape planar cutting edges. Implementing upper and lower bound finite element limit analysis (FELA) in accordance with Terzaghi's conventional bearing capacity equation, the bearing capacity factors of the cutting edge of open caissons are evaluated. The design charts for the bearing capacity of cutting edges are determined by accounting for the effects of the radii ratio of the circular caisson, distance ratio of planar cutting edges, cutting angle of cutting edge, soil internal friction angle, and spacing between the cutting edges. The soil failure planes corresponding to the aforementioned aspects of the cutting edges are also evaluated.

KEYWORDS:

• Open caisson
• cutting edge
• radii ratio
• cutting angles
• FELA
• failure plane

Disclosure statement

On behalf of all authors, the corresponding author states that there is no conflict of interest

Data availability statement

The data and materials in this paper are available on request made directly to the corresponding author

Additional information

Funding

This research budget was allocated by National Science, Research and Innovation Fund (NSRF) and King Mongkut’s University of Technology North Bangkok (Project no. KMUTNB-FF-67-A-05).