Supplementing pine with European beech and poplar in oriented strand boards

Abstract

The objective of the study was to compare the properties of oriented strand boards (OSBs) made from the following mixtures: European beech and poplar, beech and pine, poplar and pine and 100% pine (i.e. the conventional raw material for OSB in Europe). Panels with 50–50% of beech-poplar/beech-pine/poplar-pine at two density levels of 650 kg/m³ and 720 kg/m³ were made with 5% pMDI (poly methylene di-isocyanate) as binder at 180°C and 240s as press conditions. Results showed that panels comprising a mixture of European beech and poplar have higher mechanical properties compared to panels made with mixtures of pine-beech or pine-poplar. In addition, for all panels, when density is increased from 650 kg/m³ to 720 kg/m³, mechanical properties increased. Internal bond values for all designs were in the same range, especially at higher density (720 kg/m³). The pure pine panels showed lower values between different designs. Thickness swelling, an important physical property of OSB, improved when face and core layers consisted of a mixture of beech and poplar strands.

Keywords:

• European beech and poplar
• OSB
• pine
• technical properties

Acknowledgements

The authors wish to acknowledge PALLMAN Company, Zweibrücken, and Kronoply Company, Heiligengrabe, Germany, for supporting strand preparation. In addition, the authors thank HUNTSMAN Company, Everberg, Belgium, for kindly supplying pMDI resin.