Migration of photoinitiators from cardboard into dry food: evaluation of Tenax® as a food simulant

ABSTRACT

Photoinitiators are widely used to cure ink on packaging materials used in food applications such as cardboards for the packaging of dry foods. Conventional migration testing for long-term storage at ambient temperature with Tenax^® was applied to paperboard for the following photoinitiators: benzophenone (BP), 4,4ʹ-bis(diethylamino)benzophenone (DEAB), 2-chloro-9H-thioxanthen-9-one (CTX), 1-chloro-4-propoxy-9H-thioxanthen-9-one (CPTX), 4-(dimethylamino)benzophenone (DMBP), 2-ethylanthraquinone (EA), 2-ethylhexyl-4-dimethylaminobenzoate (EDB), ethyl-4-dimethylaminobenzoate (EDMAB), 4-hydroxybenzophenone (4-HBP), 2-hydroxy-4-methoxybenzophenone (HMBP), 2-hydroxy-4ʹ-(2-hydroxyethoxy)-2-methylpropiophenone (HMMP), 2-isopropyl-9H-thioxanthen-9-one (ITX), 4-methylbenzophenone (MBP) and Michler’s ketone (MK). Test conditions (10 days at 60°C) were according to Regulation (EU) No. 10/2011 and showed different migration patterns for the different photoinitiators. The results were compared with the migration in cereals after a storage of 6 months at room temperature. The simulation with Tenax at 60°C overestimated actual migration in cereals up to a maximum of 92%. In addition, the effect of a lower contact temperature and the impact of the Tenax pore size were investigated. Analogous simulation performed with rice instead of Tenax resulted in insufficiently low migration rates, showing Tenax is a much stronger adsorbent than rice and cereals.

KEYWORDS:

• Tenax®
• kinetics
• cereals
• photoinitiators
• migration
• food-contact material
• board

Disclosure statement

No potential conflict of interest was reported by the authors.

Supplemental material

The supplemental data for this article can be accessed here.

Additional information

Funding

The authors thank the Belgium Food Safety Agency (FAVV-AFSCA) for financial support [grant number FAVV_DGLABO_NRLCHEM_2012].