Improving the properties of straw biomass rattan by corn starch

Figures & data

Table 1. Technological condition of granulation.

Parameter name	Parameter setting
I area temperature	160°C
II area temperature	160°C
III area temperature	160°C
IV area temperature	170°C
The outlet temperature	180°C
Main engine rate	400 r/min

Table 2. Technological condition of extruding.

Parameter name	Parameter setting
I area temperature	160°C
II area temperature	160°C
III area temperature	160°C
IV area temperature	170°C
The outlet temperature	180°C
Main engine rate	400 r/min
Feeding rate	40 r/min
Traction driver frequency	3.0
Winding driver frequency	1.5

Figure 1. Tensile strength versus CS content of SBR.

Figure 2. Elongation at break versus CS content of SBR.

Figure 3. Melting performance versus CS content of SBR.

Figure 4. Hydroscopicity versus CS content of SBR.

Figure 5. TGA versus CS content of SBR.

Figure 6. DTG versus CS content of SBR.

Figure 7. The surfaces of SBR with none (a) and 15 wt.% (b) CS content.

Figure 8. The sections of SBR with none (c) and 15 wt.% (d) CS content.