Study of flow and heat transfer characteristics around a flat plate located between two symmetrical cylinders

Abstract

This study was conducted to investigate the flow and heat transfer characteristics of a flat plate located between two symmetrical cylinders. Flow visualization experiments were conducted based on the open-loop fluid test bench to verify the accuracy of numerical simulation. The effects of nondimensional vertical gap space (C/D) between the cylinder and the plate ranging from 0.1 to 0.8 were considered. Simulations were carried out at a fixed Reynolds number of 500. The numerical results show that the gap space is a key parameter of the flow and heat transfer characteristics. In cases of small gap space, a pair of large-scale vortices and different shapes of vortices are formed along with the plate. The heat transfer effect is improved in the upstream and downstream areas of the plate but deteriorated in the middle area. In cases of large gap space, large-scale vortices disappear and a single vortex is formed near the middle area of the plate, which improves the heat transfer effect there. For special cases of C/D = 0.3 and 0.6, the heat transfer enhancement caused by flow instability is discussed in detail. These results could provide theoretical guidance for the design of heat exchanger equipment.

Additional information

Funding

This research work is supported by the National Natural Science Foundation of China (Foundation No. 51476080) and Jiangsu Province "doctor of entrepreneurship and innovation" and Jiangsu Province postdoctoral Fund (2018k099c) and “The Nature Science Foundaion of the Jiangsu Higher Education Institutions of China (20KJB470013) and Nantong Science and Technology Plan Project (JC2020097).