Abstract
Cold metal transfer (CMT) welding is a promising process to improve the mechanical characteristics of the hard to weld 7075-T6 aluminium alloy owing to its unique advantages in contrast to conventional metal inert gas welding process. The welded joints, using ER5356, were identified and characterised by means of optical microscopy, scanning electron microscopy and energy dispersive spectroscopy. Mechanical properties were measured by tensile and hardness tests. Results indicate that CMT provides better joint tensile strength and ductility compared to metal inert gas welding. The softness in the heat affected zone was very low, but a big hardness gap was recognised in the welded metal compared to base metal. The joint had mechanical property coefficients of 77%, 60% and 69% for yield strength, ultimate tensile strength and elongation respectively.
Acknowledgements
We would like to thank Austrian Institute of Technology (AIT) for the financial support in this project. Moreover, we would like to thank Austrian Research Promotion Agency (FFG), the Federal Ministry for Transport, Innovation and Technology (bmvit), and the State of Upper Austria for sponsoring this research work in the framework of COMET.