Comparative study of the uniformity of coating thickness of pellets coated with a conventional Wurster chamber and a swirl generator-equipped Wurster chamber

Abstract

This study evaluated the performance of two bottom-spray coaters and the effect of pellet-size variability on coating uniformity. A conventional Wurster chamber was used for the first group of trials, and a Wurster chamber with a novel swirl-flow generator design was used for the second. The results confirmed that when using a conventional Wurster coating chamber, pellets with a smaller diameter receive significantly less coating material compared to those with larger diameters. The swirl generator-equipped Wurster chamber achieved close to uniform coating thickness regardless of pellet size. The ratio (M_S) of the mass of dye deposited in the coating layer to pellet surface area indicates that coating was much more evenly distributed using the swirl-flow coater. Coating thickness was also analyzed using SEM micrographs and the results were in close agreement with the M_S factor values. Inter-particle coating mass variation was also lower in case of swirl-flow coater. The results of this study show that a swirl-flow coater is suitable for coating particles of variable size. They also showed an improvement in coating process yield when using the swirl-flow coater.

Keywords::

• Wurster chamber
• swirl-flow
• pellets
• coating thickness
• fluid-bed