![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
This paper describes the development of a compact, low power, implantable system for in vivo monitoring of oxygen and glucose concentrations. The telemetry-instrumentation system consists of two amperometric sensors: one oxygen and one glucose biosensor and two potentiostats for biasing the sensors, an instrumentation amplifier to subtract and amplify sensor output signals, and a signal transmitter subunit to convert and transmit glucose dependent signal from the sensors to a remote data acquisition system. The system produces a unipolar glucose dependent voltage in the range of 1 to 3.6 V which is converted to a frequency and then transmitted using a frequency-modulated (FM) oscillator. Initial tests were performed on an open model electronic circuit using resistors to simulate sensor outputs in the 10 to 1000 nA range. Further in vitro evaluation of the system was conducted with a compact printed circuit board embedded in silicone elastomer, entirely submerged in buffer solution using actual sensors. The test results indicated satisfactory operation of the system in simulated implantation conditions for seven days. Response curve of transmitted signal vs glucose concentration was obtained. The results of the in vitro evaluation of the telemetry system permits its subcutaneous implantation in an animal model.