177
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Numerical Study of Confined Laminar CH4/Air Diffusion Flames Established in an Inverted Burner

&
Pages 657-671 | Received 15 May 2013, Accepted 19 Nov 2013, Published online: 23 Apr 2014
 

Abstract

Several experimental studies have demonstrated that confined laminar diffusion flames established in an inverted burner are very stable and emit soot when the global equivalence ratio exceeds a critical value. An inverted diffusion flame can be used as a stable source of soot particles for development and intercomparison of various particle sizing techniques. Unlike normal coflow diffusion flames fired upward, inverted diffusion flames fired downward experience a negative gravity, the resultant flow fields are very different, and the residence time is significantly prolonged. The different flow fields in normal and inverted diffusion flames mean that the flame structure and soot formation characteristics are significantly different. This study makes a first attempt to numerically investigate the flame properties and soot formation in confined laminar coflow CH4/air diffusion flames established in an inverted axisymmetric burner at atmospheric pressure. A fairly detailed reaction mechanism, GRI Mech 3.0, was used to model combustion chemistry. Soot formation was modeled using a semi-empirical, acetylene-based, two-equation soot model. Radiation heat transfer was calculated using the discrete-ordinates method and a wide-band non-gray gas model. Numerical calculations were conducted over a relatively narrow range of global equivalence ratio of 0.54–0.67 based on a recent experimental study. The heat transfer boundary condition was found to be important to the prediction of soot emission and the velocity distribution. Using measured temperature distribution along the quartz tube, the numerical model successfully predicted the emission of soot under the conditions investigated and revealed the flow, temperature, and species concentration distributions in the inverted coflow diffusion flames for the first time. However, the predicted primary soot particle diameters are significantly smaller than those reported in the literature based on TEM images analysis of sampled soot. The discrepancies between the numerical results and experimental data can be attributed to the deficiency of the simple soot model and the approximate treatment of the heat transfer boundary conditions at the quartz tube.

Log in via your institution

Log in to Taylor & Francis Online

PDF download + Online access

  • 48 hours access to article PDF & online version
  • Article PDF can be downloaded
  • Article PDF can be printed
USD 61.00 Add to cart

Issue Purchase

  • 30 days online access to complete issue
  • Article PDFs can be downloaded
  • Article PDFs can be printed
USD 1,493.00 Add to cart

* Local tax will be added as applicable

Related Research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.