Internal stress and structural geometry calculations of a RAINBOW actuator

Abstract

The performance of the Reduced And INternally Biased Oxide Wafer (RAINBOW) actuator developed by Haertling, as explained by many authors, mainly owes to the special behaviors of domains under the high internal stress status. The finite element method (FEM) was the one used by Haertling's group to simulate the internal stress in RAINBOW and its dome shape of RAINBOW, and their FEM simulation results can explain some experimental results of RAINBOW actuator. In this paper, a simple model is presented to evaluate the internal stress and dome shape of RAINBOW actuator on the basis of the two step formation of RAINBOW structure. The internal radius stress and structural deformation of RAINBOW actuators with different geometrical dimensions were calculated by the present model. The results show good agreements with that of FEM simulation by Haertling and by us. Moreover, the optimal thickness ratio (the reduced layer/total) of the RAINBOW actuator, which represents the highest displacement induced by an electric field in its symmetric axial, can be directly determined from this model (the optimal thickness ratio is about 0.33, close to that calculated by FEM). This model has a clear physical meaning, explaining easily the non-uniform stress in the RAINBOW actuators from the physical point view, and is very useful for the RAINBOW actuator designs. These advantages are not so easily obtained by FEM. From the point of view of the presented model, the origin of the strain-amplifying mechanism of the RAINBOW was preliminarily considered to be due to the structural geometry of the unique dome shape.

Key Words:

• RAINBOW actuator
• internal stress
• FEM