![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
In the design of bandpass filters, the use of λ/2 stubs of shunt configuration had been mostly unacceptable due to their effect of narrow stopband bandwidths in the ensuing filters. The design of bandpass filter presented in this article introduces 360° series transmission line segments to increase the stopband bandwidths to an acceptable level without affecting the wide passband. This designed filter has low insertion loss of less than –1.98 dB and a fractional bandwidth of 50% at 6 GHz mid-band frequency. A sharp rejection in the stopband is observed. To further widen the bandwidth of stopbands, a series capacitor and a shunt stub are used. The transmission line model of the filter is in good agreement with measured results. The filter is planar and is fabricated on FR-4 substrate which makes it cost-effective and easy to fabricate.