Abstract
While many control charts have been developed for monitoring the time interval (t) between the occurrences of an event, many other charts are employed to examine the magnitude (x) of the event. These two types of control charts have usually been investigated and applied separately with limited syntheses in conventional statistical process control (SPC) methods. This article presents an SPC method for simultaneously monitoring the time interval t and magnitude x. It, essentially, combines a t chart and an x chart, and is therefore referred to as a t&x chart. The new chart is more effective than an individual t chart or individual x chart for detecting the out-of-control status of the event, in particular for detecting downward shifts (sparse occurrence and/or small magnitude). More profound is that, compared with an individual t or x chart, the detection effectiveness of the t&x chart is more invariable against different types of shifts, i.e. t shift, x shift and joint shift in t and x. The t&x chart has demonstrated its potential not only for manufacturing systems, but also for non-manufacturing sectors such as supply chain management, office administration and health care industry.