Optimal fixture parameters considering locator errors

Abstract

A machining fixture consists of elements such as locators, clamps and supports. Fixture design aims at ensuring workpiece quality by restraining the workpiece in the desired position throughout machining thereby minimising the overall machining error. Workpiece elastic deformation and geometric error of locators are major components of the overall machining error. The effect of geometric error is considerable in certain cases and hence cannot be ignored. For a given error in locators, the geometry related machining error is manifest in the locator layout whereas the workpiece deformation depends on both the layout and the external forces such as clamping and machining forces. Layout of fixturing elements and the applied clamping forces are collectively called fixture parameters. The objective of minimising the total machining error can be achieved by optimising either one or both of these parameters. In this research work both of these parameters are simultaneously optimised using a genetic algorithm (GA). A finite element model of the workpiece fixture system is developed and analysed using commercial finite element software ANSYS®. Elastic deformation of workpiece under machining loads is obtained from the finite element model. MATLAB® based GA is interfaced with ANSYS® for the determination of total machining error and subsequent optimisation with the objective of complying with tolerance requirements on the critical machining feature. Results indicate that the error sources can contribute to the final machining error in varying degrees. The results also underscore the need to consider the entire machining path for optimisation of the fixture parameters.

Keywords:

• optimal fixture parameters
• machining error
• locator error
• finite element method
• genetic algorithm

Acknowledgement

The first author wishes to acknowledge the support of Caledonian College of Engineering, Oman in carrying out this research work.