![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
ABSTRACT
An experimental campaign was conducted to determine drag coefficients of circular cylinders in axial flow of water for a wide range of length-to-diameter ratios (L/D) from 2 to 35. Drag force acting on the circular cylinders was acquired at a velocity of 2 to 6 m/s, which corresponds to the Reynolds numbers of 2.2 × 105 to 7.0 × 105. The experimental data were validated by analysis using the commercial CFD code, Star-CCM+. The measured drag coefficients increased monotonically as the L/D increased with the range of Reynolds numbers, and were almost constant regardless of the Reynolds number. The drag coefficient was decomposed by the term of form drag and skin friction. As the value of L/D increased, the drag coefficient increased due to the skin friction drag term. The drag coefficient correlation was proposed as a function of L/D. The predicted values were consistent with both the experimental data and numerical simulation results. Furthermore, this correlation was applied to a fuel assembly with a channel box, it was shown that the drag coefficient can be predicted for a wide range of Reynolds numbers by specifying an appropriate form drag term.
Acknowledgments
The authors would like to thank Ms. Yoko Yoshimura and Mr. Takashi Yasumoto of The Japan Atomic Power Company for valuable comment especially on the BWR fuel. Thanks are extended to Dr. Yoshiaki Maeda, Mr. Yoshiaki Kawa, and Mr. Michihiro Koike of CERES Inc. for helping with the experiments.
Disclosure statement
No potential conflict of interest was reported by the author(s).
Nomenclature
Table