Designing the Second Target Station with a Coupled Neutronics-Mechanical Optimization Workflow

Abstract

The Second Target Station (STS) at the Spallation Neutron Source of the U.S. Department of Energy’s Oak Ridge National Laboratory is being designed to become the world’s highest peak brightness source of cold neutrons. As the STS project evolves, neutronics and other engineering analyses will inform many design iterations. To facilitate this process, a fully automated optimization workflow was developed to convert a parameterized computer-aided-design model of the target into an unstructured mesh geometry model and then to run a neutronics calculation and (optionally) a mechanical analysis for each design iteration. This workflow enables efficient, high-fidelity modeling; simulation; and optimization of new designs, as has been demonstrated for the optimization of the STS neutron moderators. In this paper, we present the results of our first major effort to automate the design optimization process for a spallation target. In the first analysis, the goal is to find optimal dimensions of a monolithic tungsten target coupled with an optimal super-Gaussian proton beam profile to deliver maximum brightness of the resulting neutron beams while maintaining good mechanical properties of the target. In the second analysis, geometric and beam parameters are optimized for an alternative design with tungsten plates, which can reach superior mechanical performance without compromising the neutronics performance.

Keywords:

• Spallation
• tungsten
• optimization
• MCNP
• Dakota

Acknowledgments

This research used resources of the Spallation Neutron Source Second Target Station Project at ORNL. ORNL is managed by UT-Battelle LLC for the U.S. Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States.

Disclosure Statement

No potential conflict of interest was reported by the author(s).

Additional information

Funding

This manuscript has been authored by UT-Battelle LLC under Contract No. DE-AC05-00OR22725 with the US Department of Energy (DOE). The US government retains and the publisher, by accepting the article for publication, acknowledges that the US government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript, or allow others to do so, for US government purposes. DOE will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-pla; U.S. Department of Energy