Optimum carbonization of Kevlar fabric for electromagnetic interference shielding applications

Abstract

The study involved single-stage carbonization and physical activation of Kevlar woven fabric to convert into activated carbon fabric. The carbonization process was optimised for high carbon yield and low electrical resistivity of activated carbon fabric using Box-Behnken experimental design and response surface methodology. The three process parameters namely charcoal amount, gas flow rate, and carbonization temperature were selected. The empirical equations obtained through response surface methodology for carbon yield and electrical resistivity were found in good agreement with the experimental values. An optimum amount of charcoal, optimum nitrogen flowrate, and low carbonization temperature was found suitable for higher carbon yield. On the other hand, high charcoal amount, high carbonization temperature, and optimum nitrogen flow rate resulted in low electrical resistivity of activated carbon fabric. Later, the activated carbon fabrics were prepared under the optimum carbonization conditions to get high carbon yield and low electrical resistivity. The optimized sample for electrical resistivity showed higher electromagnetic interference (EMI) shielding properties at lower as well as higher frequencies due to its highly porous morphology and electrical conductivity.

Keywords:

• Kevlar woven fabric
• activated carbon fabric
• carbonization
• box Behnken design
• carbon yield
• electrical resistivity
• electromagnetic interference shielding

Disclosure statement

The authors have no competing interests to declare that are relevant to the content of this article.