Abstract
The Clean Seas project focused on the role that existing Earth observing satellites might play in monitoring marine pollution. Results are presented here from August 1997, for the North Sea test site, using sea surface temperature (SST), colour and synthetic aperture radar (SAR) images in conjunction with a hydrodynamic model. There was good correlation between data sources, e.g. between SST and ERS-2 SAR images. Both datasets showed the development of fine plume structures close to the Rhine outflow, apparently associated with the outflow, and possibly caused by tidal pulsing of the Rhine Plume.
The model reproduced general temperature and sediment distributions well, but fine structures were not reproduced. Model sediment distribution patterns were verified using ‘chlorophyll concentration’ data from colour sensors, representative of sediment concentration in turbid water. In conjunction with the visible channels of the Advanced Very High Resolution Radiometer and Along-Track Scanning Radiometer, they give an uncalibrated measure of the sediment load. The model gives a more complete picture of the temporal dispersion of the Rhine Plume over time than is evident from the remotely sensed data alone.
Acknowledgments
We thank RIKZ for providing us with in situ data for this study and ESA for provision of ATSR data. This research was carried out with the support of the European Commission under contract number ENV4-CT96-0334.
Notes
An updated version of a paper originally presented at Oceans from Space ‘Venice 2000’ Symposium, Venice, Italy, 9–13 October 2000.