Mapping canopy height using a combination of digital stereo‐photogrammetry and lidar

Abstract

Ranging techniques such as lidar (LIght Detection And Ranging) and digital stereo‐photogrammetry show great promise for mapping forest canopy height. In this study, we combine these techniques to create hybrid photo‐lidar canopy height models (CHMs). First, photogrammetric digital surface models (DSMs) created using automated stereo‐matching were registered to corresponding lidar digital terrain models (DTMs). Photo‐lidar CHMs were then produced by subtracting the lidar DTM from the photogrammetric DSM. This approach opens up the possibility of retrospective mapping of forest structure using archived aerial photographs. The main objective of the study was to evaluate the accuracy of photo‐lidar CHMs by comparing them to reference lidar CHMs. The assessment revealed that stereo‐matching parameters and left–right image dissimilarities caused by sunlight and viewing geometry have a significant influence on the quality of the photo DSMs. Our study showed that photo‐lidar CHMs are well correlated to their lidar counterparts on a pixel‐wise basis (r up to 0.89 in the best stereo‐matching conditions), but have a lower resolution and accuracy. It also demonstrated that plot metrics extracted from the lidar and photo‐lidar CHMs, such as height at the 95th percentile of 20 m×20 m windows, are highly correlated (r up to 0.95 in general matching conditions).

Acknowledgements

The research presented in this paper was supported by grants from the National Science and Engineering Research Council of Canada, and from Canada's Network of Centres of Excellence on Geomatics for Informed Decisions (GEOIDE). We thank LaserMap Image Plus (Boisbriand, Canada) and Optech Inc. (Toronto, Canada) for their help in producing the lidar data used in this study. We also thank the two anonymous reviewers who helped to improve the original manuscript.