Shell-and-Tube Minichannel Condenser for Low Refrigerant Charge

Abstract

The design of an innovative shell-and-tube heat pump condenser using 2 mm ID minichannels is presented. This condenser has been designed aiming at the minimization of the charge, which can be required by safety or environmental restrictions. Nevertheless, minichannels represent also a solution to the high-pressure challenge when using carbon dioxide as a refrigerant. The present prototype was realized for the use with propane in the framework of the European project SHERHPA, concerning the development of heat pumps working with natural fluids. Experimental data for heat transfer and pressure drop are reported in the present paper. The measurements have been obtained using refrigerant R22, which displays a temperature versus pressure saturation curve pretty close to the one of propane. The data have also been compared against a computational procedure for shell-and-tube heat exchangers design. The refrigerant charge has been computed by means of different void fraction correlations, showing that the expected charge is less than half the quantity required by a brazed plate condenser giving the same capacity.

Acknowledgments

The authors acknowledge the support of the European project SHERHPA, co-funded by the European Commission within the Sixth Framework Programme (2002–2006).