Bond strength of steel deformed rebars embedded in artificial lightweight aggregate concrete

Abstract

The recycling of industrial waste such as bottom ash from furnaces is an important issue in construction industry, since it enables reduction in construction cost and has beneficial effect on the environment. In this study, we have investigated the bond characteristics of steel deformed bars embedded in artificial lightweight aggregate concrete which is manufactured from bottom ash. A pullout test was performed on 144 lightweight aggregate concrete specimens to measure the bond strengths. In this test, the parameters included the compressive strength of the concrete and embedment length of rebar. The pullout load vs. slip responses and modes of failure of the specimens were identified during the test. A bond strength equation for lightweight concrete is formulated by performing a regression analysis on the test results and compared with the predictions by the existing equations such as ACI 408, Orangun’s, and Darwin’s. The comparison shows that the existing bond strength equations cannot be directly applied to the design of lightweight concrete structures and the proposed equation is able to provide a more accurate estimation of the bond strength of lightweight concrete than the existing equations.

Keywords:

• bond strength
• artificial lightweight aggregate concrete
• pullout test
• bond stress-slip relation
• embedment length

Acknowledgment

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MEST) (No. 2011-0016283).