Quartz Crystal Microbalance Monitoring of Asphaltene Adsorption/Deposition

Adsorption and deposition of asphaltenes onto differently coated (hydrophilic surfaces: silica, titanium, alumina, and a noncommercial tailor‐made FeO_x) quartz crystals from heptane/toluene (1∶1) and toluene solutions have been studied with the quartz crystal microbalance method with dissipation measurements (QCM‐D). The results show that the adsorbed mass is related to the solubility state of asphaltenes (aromaticity of the solvent), their origin (aggregate size in solution) and very little to the hydrophilicity of the investigated crystal. Adsorption/deposition of asphaltenes depends on their solubility. We found two cases: Either the asphaltenes are solubilized, or the asphaltenes are partly solubilized and partly precipitated. In the former case, asphaltenes are bounded very tightly to the surface and poorly for the latter. The change in solution composition due to decrease in asphaltene solvency causes formation of a variety of asphaltenes species. The results also were compared and discussed in relation to adsorption onto particles, determined with the UV depletion method. The study shows that QCM‐D method is a very useful tool to study the mechanisms and the effects of solvency of asphaltenes. We discuss and compare the different techniques.

Keywords:

• Asphaltenes
• adsorption
• quartz crystal microbalance (QCM‐D)
• hydrophilic
• surface
• aggregation
• flocculation

We gratefully acknowledge the members of the joint industrial programs: “Particle‐stabilized emulsions/Heavy crude oils” and “Treatment of Produced Water”, and their industrial sponsors for financial support. The authors thank Dr. Sébastien Simon and Dr. Gisle Øye for careful reading the manuscript and many useful comments.