Effect of Physical Properties and Emulsification Conditions on the Microsphere Size Prepared Using a Solvent Extraction Process

Abstract

Microspheres were prepared using a hydrocarbon-perfluorocarbon solvent extraction process. The effect of the physical properties and the emulsification conditions on the mean microsphere size was investigated. The viscosity of the dispersed and the continuous phase greatly affected the microsphere size. Smaller microspheres were produced at the same mixing intensity when the viscosity of the dispersed phase decreased. Increased continuous phase viscosity reduced the coalescenceof the droplets and hence smaller microspheres were produced. The mean microsphere size first decreased as the volume ratio of the dispersed phase to the continuous phase increased but upon further increase the mean microsphere size increased. The effect of the volume ratio on the microsphere size was linked to the surfactant concentration. The stability of the studied hydrocarbon-in-fluorocarbon emulsion is poor. One reason for the poor stability is the high density difference between the phases. The emulsion droplets were solidified by siphoning part of the emulsion in the fresh continuous phase, which extracted the solvent from the dispersed phase. The effect of emulsion transfer time between the emulsification and solidification steps on the particle size was studied but no significant effect was observedduring the controlled time interval.

Keywords:

• Emulsification
• microsphere
• particle size distribution
• solvent extraction

Acknowledgments

Financial support from Borelis Polymers Oy is greatfully acknowledged. Leila Kettunen is acknowledged for measuring the particle size distributions.