Improvement of Sweep Efficiency by Alkaline Flooding for Heavy Oil Reservoirs

Abstract

Severe viscous fingering during water flooding of heavy oil leaves a large amount of oil untouched in the reservoir. Improving sweep efficiency is vital for enhancing heavy oil recovery. This study presented a laboratory study for improving sweep efficiency by alkaline flooding in heavy oil Reservoirs. This included glass-etched micromodel flooding tests, one-dimensional flooding experiments and three-dimensional physical model study. The micromodel tests show that W/O droplet flow plays a prominent role in the alkaline flooding to improve sweep efficiency. There is a minimum alkaline concentration that generates the W/O droplet flow, and the W/O droplet flow is more obvious with the alkaline concentration increasing. A series of flood tests were conducted using 325 mPa · s, 2000 mPa · s, and 3950 mPa · s heavy oils to assess the effectiveness of W/O droplet flow in alkaline flooding for enhanced heavy oil recovery. The flood tests results demonstrate the considerable potential for improved heavy oil recovery by alkaline flooding, and moreover, the incremental oil recovery has been found to increase as the alkaline concentration increases. The result obtained in three-dimensional physical model study indicates that the sweep area can be greatly improved by the formation of W/O droplet flow in alkaline flooding.

Keywords:

• Alkaline flooding
• enhanced oil recovery
• heavy oil
• sweep efficiency
• W/O droplet flow

Acknowledgments

Financial support by the National Natural Science Foundation of China (51104170), the Fundamental Research Funds for the Central Universities (12CX06024A) the Excellent Doctoral Dissertation Training Program of China University of Petroleum (LW110203A), and the Taishan Scholars Construction Engineering Project (TS20070704) is gratefully acknowledged.