Abstract
The permanent structure induced by an Ar+ linearly polarised laser beam on an asymmetric dye-doped nematic liquid crystal cell was investigated in a pump-probe experiment. The polarisation direction of the probe beam was parallel to the easy axis and two configurations of pump beam were used: polarisation directions perpendicular and parallel to the easy axis. The transmitted intensity of the probe beam was recorded during irradiation and it was observed that it depended both on the power and polarisation direction of the pump beam. We explained the evolution of the transmitted intensity and evaluated the start time of formation of the ripple structure. The induced permanent structure in the irradiated zones and the laser-induced surface morphology was studied using a polarising optical microscope and an atomic force microscope, respectively. The surface morphology in the irradiated zones was also dependent on both the power and polarisation of the Ar+ laser beam. The orientation of the microgrooves in the ripple structure was parallel to the polarisation direction of the pump laser beam in both configurations. For a given pump power, the depth of the ripple structure was greater in the case of an Ar+ beam polarised parallel to the easy axis. The induced azimuthal anchoring energy provided by the ripple structure was evaluated.
Acknowledgement
The authors acknowledge Professor Anca-Luiza Alexe-Ionescu for fruitful discussions.