ABSTRACT
In order to lower the saturation voltage and enhance the transmittance of in-plane switching blue-phase liquid crystal display (IPS-BPLCD), IPS-BPLCD with insulating protrusion is proposed. The single-protrusion (only set on the top of pixel electrode) and double-protrusion (set on the top of pixel and common electrodes) structures are investigated in this work. The potential distribution changes when the protrusion is used. There is a thicker transverse electric field in BPLC range, because the stronger electric field at the edges of the electrodes is decentralised into BPLC range. As a result, the saturation voltage is reduced from 36.3 V to 28.9 V when the double-protrusion structure is used, and transmittance is increased by ~20%. The contrast ratio is larger than 1000:1 in 60° viewing cone using a half-wave biaxial film. Both single-protrusion and double-protrusion structures have the uniform gamma curves at large oblique viewing angles. Moreover, the off-axis image distortion index is 0.1590 at 60º polar angle when zigzag electrodes are used.
Graphical Abstract
![](/cms/asset/510df7ca-e2ba-420b-b400-62b40ab4ef9d/tlct_a_1456570_uf0001_oc.jpg)
Acknowledgements
The authors would like to thank Haiwei Chen (Group of Prof. Shin-Tson Wu, University of Central Florida, USA) for his help.
Disclosure statement
No potential conflict of interest was reported by the authors.