Abstract
This paper reports the application of Box-Behnken experimental design to illustrate the adsorption of direct dyes (Indosol Black NF and Indosol Orange RSN) using polyethyleneimine (PEI)-treated peanut husk biomass. The effect of three independent variables (initial dyes concentration, biosorbent dose and pH) was investigated during the study. Maximum biosorption capacity (141 and 98.2 mg/g) of PEI-pretreated biomass was achieved with 200 mg/L initial dye concentration and 0.05 g/50 mL biomass dose for Indosol Black NF and Indosol Orange RSN, respectively. Acidic pH was found to be favourable for maximum dyes removal. Characterisation of biosorbent was carried out through Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy, thermogravimetric analysis (TGA) and point of zero charge determination. FT-IR analyses confirmed the involvement of carboxylic and carbonyl groups. The desorption study was also conducted to check out the possibility of regeneration of dyes and adsorbent and it was found that 51.58 and 76.6% of Indosol Black NF and Indosol Orange RSN, respectively, can be desorbed from the loaded biosorbent by using 1 M NaOH solution. The results indicated that PEI-treated peanut husk biomass can be used as an efficient biosorbent for the removal of Indosol Black NF and Indosol Orange RSN dyes from aqueous solutions.
Acknowledgements
The authors are thankful to Higher Education Commission (HEC) of Pakistan for the financial assistance under project No. 20-159/R7D/09/1841and Indigenous Ph.D. Fellowship Programme.