ABSTRACT
For the adsorption of malachite green (MG), ‘purified by thermo-acid (HCl) diatomite’ (DTA) and its derivative ‘3-mercaptopropyltrimethoxysilane functionalised diatomite’ (DTA-MTMS) were prepared as adsorbent and the effects of thermo-acid activation and surface functional groups on adsorption were investigated. Many acids dissolve certain substances in diatomite and change their chemical composition. Thermo-acid treatment and silane-modified diatomite fractions were characterised byBrunauer-Emmett-Teller (BET), scanning electron microscope (SEM-EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and thermal analysis (TG-DTA). The effects of contact time, solution pH, temperature and initial dye concentration on adsorption were investigated. Equilibrium isotherms are defined using nonlinear Langmuir, Freundlich, Dubinin – Radushkevich (D – R) and Sips adsorption isotherm equations. Isotherm data for both adsorbents are best fitted on the Freundlich and Sips model. The qmax values determined from the Sips model are 18.8415 mgg−1 and 21.4713 mgg−1 for DTA and DTA-MTMS, respectively. It was determined that DTA-MTMS performed better than DTA for MG adsorption. The results showed that MG adsorption was compatible with the pseudo-second-order (PSO) kinetic model. From the adsorption energy value (E < 8 kJ mol−1), it was confirmed that physical adsorption was dominant in the adsorption process. The nature of the sorption process is exothermic and spontaneous (due to negative values ΔH° and ΔG°). The results of the study showed that prepared DTA and synthesised DTA-MTMS can be considered as an economical and promising adsorbent in removing organic dyes from wastewater.
Disclosure statement
No potential conflict of interest was reported by the author(s).
Supplementary material
Supplemental data for this article can be accessed here.