An iron and bronze workshop in the lower city of Tell es-Safi/Gath, dated to the mid-late Iron IIA, contributes new data on the chronology, organization, and practice of metal production in the urban Philistine setting. Analyses show that iron objects were likely produced and maintained on a large scale, alongside bronze, employing regionally unique forms of crucibles and tuyères. The material culture of metalworking is discussed in relation to contemporaneous iron production sites in the region, building a more robust picture of the adoption of iron metallurgy in the Levant versus the status of bronze and iron.
This study was funded by two Israel Science Foundation grants (no. 1047/17 to A. Eliyahu-Behar and no. 911/18 to A.M. Maeir). V. Workman is grateful to the Azrieli Foundation, the RIAB Minerva Center, and ISF grant no. 1047/17 for scholarship support. The authors are grateful to Maria Eniukina and Jay Rosenberg for help with figure preparation.
Notes
1 In recent years a consensus has developed that iron was not extensively produced in the southern Levant until well into the Iron IIA, in the late 10th/early 9th centuries BCE (Pigott Citation2003; Veldhuijzen and Rehren Citation2007; Eliyahu-Behar et al. Citation2012; Citation2013; Yahalom-Mack and Eliyahu- Behar 2015; Erb-Satullo and Walton Citation2017; Eliyahu and Yahalom-Mack 2018a; Erb-Satullo Citation2019; Rabinovich et al. 209); an exception is the Iron I (11th ca. BCE) workshop at Tell Tayinat (Roames Citation2011; Welton et al. Citation2019).
2 A stone-paved floor with transitional Iron I–IIA ceramics was found below the floor and walls of the metal workshop. In a room immediately to the south, a fragment of a bronze crucible was found in this layer, which may indicate that bronze working had been practiced here prior to Stratum D3, suggesting spatial continuity of metalworking, similar to evidence revealed at Hazor and Megiddo (Yahalom-Mack et al. Citation2014a; 2017; Kleiman et al. Citation2017).
3 The body of the Tell es-Safi/Gath tuyères are similar to Type Tu4 in Yahalom-Mack’s typology (2019: 68–69, ), but continue straight and truncate with a non-tapered nozzle.
4 This slag type was also identified and characterized by Veldhuijzen Citation2005: 182–185 (technical ‘Ceramic-Rich’ slag) at Tell Hammeh and by Eliyahu-Behar et al. Citation2008 at Tel-Dor (Group 2). See Workman, Maeir and Eliyahu-Baher forthcoming for an analytical study of this type.
5 We are grateful to Profs. Amotz Agnon and Ruth Shahack-Gross for identifying the stone type and to Prof. Danny Rosenberg for reviewing the wear marks.
6 Coinciding with recent analysis showing little to no copper content in the vitrification layers of round tuyères (Workman, Maeir and Eliyahu-Behar forthcoming).
7 It is noteworthy that the two types were found together in heaps of iron smelting waste from 8th to 2nd century BCE phases at the massive iron production sites of Meroe and Hamadab in Sudan (Ting and Humphris Citation2017: 35, b.).
8 Elbow tuyères, sometimes confused in the literature with the Levantine bent-tipped style, are well-known in copper production in LB Cyprus (Knapp Citation2012: 18, .4; Kassianidou Citation2012, Citation2013: 136, 139–140). Their appearance in the iron/bronze workshop at Iron I Tell Tayinat (Roames Citation2011; Welton et al. Citation2019: 320–322. Fig. 27.5) is a curious synchronism that may be connected to the contemporaneous appearance of LH IIIC style ceramics and spool-shaped loom weights, supposed signifiers of the cultural influence of the Sea Peoples. This bronzeworking tool has yet to be uncovered in the southern Levant.
9 Examples can be found in Israel: MB to Iron Age Hazor and Megiddo, LB–Iron I Timna; Cyprus: LB Enkomi, LB Kition; Cyclades: LB Ayia Irini, LB Troullos; and Greece: Olympia, Athens.
10 For a discussion on local or foreign production, see Yahalom-Mack and Eliyahu-Behar Citation2015.
11 See Bourogiannis Citation2018: 50–54; Kourou Citation2019 for a similar conclusion from an Aegean perspective.
12 Bronze was still the primary metal for artefacts of adornment (Yahalom-Mack and Eliyahu- Behar 2015: 290).
Pigott, V.C. 2003. Iron and Pyrotechnology at 13th Century–Late Bronze Age–Tel Yin>am (Israel): A Reinterpretation. In: Stöllner, T., Körlin, G., Steffens, G., and Cierny, J. eds., Man and Mining. Bochum: 365–375.
Veldhuijzen, H.A. and Rehren, T. 2007. Slags and the City. Early Iron Production at Tell Hammeh, Jordan, and Tel Beth-Shemesh, Israel. In: La Niece, S., Hook, D.R. and Craddock, P.T., eds. Metals and Mines—Studies in Archaeometallurgy. London: 189–201.
Eliyahu-Behar, A., Yahalom-Mack, N., Shilstein, S., Zukerman, A., Shafer-Elliot, C., Maeir, A.M., Boaretto, E., Finkelstein, I. and Weiner, S. 2012. Iron and Bronze Production in Iron Age IIA Philistia: New Evidence from Tell es-Safi/Gath, Israel. JAS 39: 255–267.
Eliyahu-Behar, A., Yahalom-Mack, N., Gadot, Y., and Finkelstein, I. 2013. Iron Smelting and Smithing in Major Urban Centers in Israel during the Iron Age. JAS 40: 4319–4330.
Erb-Satullo, N.L. and Walton, J.T. 2017. Iron and Copper Production at Iron Age Ashkelon: Implications for the Organization of Levantine Metal Production. JAS Reports 15: 8–19.
Erb-Satullo, N.L. 2019. Innovation and Adoption of Iron in the Ancient Near East. Journal of Archaeological Research57: 557–607. doi: 10.1007/s10814-019-09129-6
Roames, J. 2011. The Early Iron Age Metal Workshop at Tell Tayinat, Turkey. In: Vandiver, P.L.W., Ruvalcaba, J.L., Reedy, C. and Frame, L., eds. Materials Issues in Art and Archaeology IX. Cambridge, MA: 149–155.
Welton, L., Harrison, T., Batiuk, S., Ünlü, E., Janeway, B., Karakaya, D., Lipovitch, D., Lumb, D. and Roames, J. 2019. Shifting Networks and Community Identity at Tell Tayinat in the Iron I (ca. 12th to Mid-10th Century BCE). AJA123: 291–333. doi: 10.3764/aja.123.2.0291
Yahalom-Mack, N., Gadot, Y., Eliyahu-Behar, A., Bechar, S., Shiltein, S., and Finkelstein, I. 2014a. Metalworking at Hazor: A Long-Term Perspective. OJA 33: 19–45.
Kleiman. A., Cohen, M.E., Hall, E., Homsher, R. and Finkelstein, I. 2017. Cult Activity at Megiddo in the Iron Age: New Evidence and a Long-Term Perspective. ZDPV 133: 24–52.
Veldhuijzen, H.A. 2005. Early Iron Production in the Levant: Smelting and Smithing at Early 1st Millennium BCE Tell Hammeh, Jordan and Tel Beth-Shemesh, Israel (Ph.D. dissertation, University College London). London.
Eliyahu-Behar, A., Shilstein, S., Raban-Gerstel, N., Goren, Y., Gilboa, A., Sharon, I. and Weiner, S. 2008. An Integrated Approach to Reconstructing Primary Activities from Pit Deposits: Iron Smithing and Other Activities at Tel Dor under Neo-Assyrian Domination. JAS 35: 2895–2908.
Ting, C. and Humphris, J. 2017. The Technology and Craft Organization of Kushite Technical Ceramic Production at Meroe and Hamadab, Sudan. JAS Reports 16: 34–43.
Knapp, A.B. 2012. Metallurgical Production and Trade on Bronze Age Cyprus: Views and Variations. In: Kassianidou, V. and Papasavvas, G., eds. Eastern Mediterranean Metallurgy and Metalwork in the Second Millennium BC. Oxford: 14–25.
Kassianidou, V. 2012. Metallurgy and Metalwork in Enkomi: The Early Phases. In: Kassianidou, V. and Papasavvas, G., eds. Eastern Mediterranean Metallurgy and Metalwork in the Second Millennium BC. Oxford: 94–106.
Roames, J. 2011. The Early Iron Age Metal Workshop at Tell Tayinat, Turkey. In: Vandiver, P.L.W., Ruvalcaba, J.L., Reedy, C. and Frame, L., eds. Materials Issues in Art and Archaeology IX. Cambridge, MA: 149–155.
Welton, L., Harrison, T., Batiuk, S., Ünlü, E., Janeway, B., Karakaya, D., Lipovitch, D., Lumb, D. and Roames, J. 2019. Shifting Networks and Community Identity at Tell Tayinat in the Iron I (ca. 12th to Mid-10th Century BCE). AJA123: 291–333. doi: 10.3764/aja.123.2.0291
Yahalom-Mack, N. and Eliyahu-Behar, A. 2015. The Transition from Bronze to Iron in Canaan: Chronology, Technology, and Context. Radiocarbon57: 285–305. doi: 10.2458/azu_rc.57.18563
Bourogiannis, G. 2018. The Phoenician Presence in the Aegean during the Early Iron Age: Trade, Settlement and Cultural Interaction. Rivista de Studi Fenici 46: 43–88.
Kourou, N. 2019. Cyprus and the Aegean in the Geometric Period: The Case of Salamis. In: Rogge, S., Ioannou, C. and Mavrojannis, T., eds. Salamis of Cyprus: History and Archaeology from the Earliest Times to Late Antiquity. Conference in Nicosia, 21–23 May 2015. Kornwestheim: 77–97.