Optimization of the Spray Drying Operating Parameters—A Quick Trial-and-Error Method

Abstract

This short communication reports an optimization approach to effectively determine suitable spray drying operating parameters for a pilot-scale dryer. The proposed optimization approach is essential, as pilot-scale investigations and medium-scale contract productions often involve usage of standard spray dryer units which is not specifically designed for the feed material used. This optimization approach was developed based on past studies on the effect and relationship of the many spray drying operating parameters and highlights two factors which has to be solved (or considered) chronologically: dripping problem, followed by product caking problem. Based on this proposed approach, an algorithm was developed in a case study to optimize an available spray dryer for our future experimental study on wall deposition. In this case, the operating parameters were determined under minimal experimental runs. This proposed optimization approach will be a useful tool for operators and experimenters utilizing spray dryers of similar type, particularly in exploring new feed materials. Depending on the optimization objectives and experimental limitations, different algorithms can be developed. Apart from that, interesting deposition pattern was also observed in the case study. This short communication also reported on the design of an internal rig for further studies on wall deposition.

Keywords:

• Operating parameters
• Optimization
• Spray drying

Notes

Atomization revolution: 27,000 RPM. Air flow rate: 76 m³ h⁻¹ (S.T.P.).