Influence of Atomizing Parameters on Droplet Properties in a Pulse Combustion Spray Dryer

Abstract

A pulse combustor employed in a spray-drying system offers a new approach for liquid atomization that yields high-quality powders at low cost. Using a pulse combustion atomizer, there is no need for any form of nozzle dispersion and its atomization mechanism differs from those of conventional atomizers, such as rotary atomizers and pressure and pneumatic nozzles. In this work, based on the analysis of atomization mechanism, experiments of unsteady pulsating atomization were carried out in an experimental system of a Helmholtz-type pulse combustor. An optical analyzer was used for measuring the mean diameter of atomized droplet and droplet distribution. The effects of liquid feed rate, air flow oscillatory frequency, and liquid viscosity on atomized droplet size and size distribution were investigated and analyzed. The results indicate that the uniform droplet size distribution can be obtained under the conditions of a low feed rate, high-frequency pulsating flow, and moderate viscosity. The range of the droplets' Sauter mean diameter (SMD) is between 50 and 80 µm. The pulsating air flow from the pulse combustor can be used to atomize liquid or slurry without a nozzle and the atomizing quality can meet the requirements of spray drying.

Keywords:

• Atomization
• Pulse combustion
• Size distribution
• Spray dryer

ACKNOWLEDGEMENT

The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China under Grant No. 50676104.